混合动力装甲车辆能量管理策略实时仿真

为解决混合动力装甲车辆多动力源输出优化匹配难题,针对一种具有3个动力源的混合动力系统中各动力源的输出特性和驱动电机功率需求特点,制定了具有双层结构的能量管理策略:顶层的系统功率分配策略完成负载功率估计及其在各动力源间的分配;底层的部件级控制策略实现发动机-发电机组和动力电池的优化控制。通过构建一种分布式硬件在环仿真平台对能量管理策略进行仿真验证。结果表明:混合动力系统能够很好地满足负载功率需求,实现了对多个目标的优化控制。     

电传动装甲车辆负载功率预测实时能量管理策略

针对电传动装甲车辆负载功率预测功能缺失导致控制作用滞后的问题,提出一种具有较高负载功率预测精度的实时能量管理策略。在分析整车结构的基础上,采用理论分析和数据拟合方法,建立各动力源数学模型。将差分自回归移动平均模型和自适应马尔可夫链两种预测方法相结合,设计非平稳趋势性负载功率组合预测方法。在非线性模型预测控制框架下,构建多目标优化函数,采用序列二次规划法在有限时域内实时求解最优控制指令,优化多动力源协调控制过程。依托硬件在环仿真平台进行多路面行驶实验,对比有无功率预测的能量管理控制效果。结果表明,改进的实时能量管理策略对未来负载功率具有较好的预见性,能够显著优化多动力源协调控制过程,提升车辆燃油经济性,稳定母线电压和电池荷电状态,对传统模型预测控制下的工程应用场景具有一定借鉴意义。     

电子稳像中运动矢量一致性的优化算法

针对电子稳像技术传统块匹配法求运动矢量的固有缺点,采取四叉树———一种变块匹配方法计算运动矢量,使求得的运动矢量有较好的一致性.与其它变块匹配方法相比,该方法克服了其它变块匹配法的不足.实验表明,使用该法求出的运动矢量有较好的一致性和准确性.     

电磁辐射对桥丝式电火工品性能影响研究

利用传导方法研究射频对桥丝式电火工品的桥丝电阻、烤爆、迟发火以及瞎火等性能影响。研究结果表明,在10％发火功率和0．4MHz的敏感频率条件下,所研究的3种电火工品在照射1～5min后,电阻增加1.2％～7．4％,并且17．3％的试样在照射的过程中出现了烤爆;在对经过照射后的试样进行正常的发火感度试验中,发火时间显著增加,出现了不同程度的迟发火,16．9％的试样瞎火。     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Research on fuze microswitch based on corona discharge effect

Abnormal voltages such as electrostatic, constant current, and strong electromagnetic signals can erro-neously trigger operation of MEMS pyrotechnics and control systems in a fuze, which may result in casualties. This study designs a solid-state micro-scale switch by combining the corona gas discharge theory of asymmetric electric fields and Peek's Law. The MEMS switch can be transferred from "off" to"on" through the gas breakdown between the corona electrodes. In the model, one of the two electrodes is spherical and the other flat, so a non-uniform electric field is formed around the electrodes. The theoretical work is as follows. First, the relation among the radius of curvature of the spherical electrode, the discharge gap, and the air breakdown voltage is obtained; to meet the low voltage (30-60 V) required to drive the MEMS switch, the radius of curvature of the spherical electrode needs to be 10-50 μm and the discharge gap between the two electrodes needs to be 9-11 μm. Second, the optimal ratio ε is introduced to parameterize the model. Finally, the corona discharge structural parameters are determined by comparing the theoretical and electric field simulation results. The switch is then fabricated via MEMS processing. A hardware test platform is built and the performing chip tested. It is found that when the electrode gap is 9 μm, the electrostatic voltage is at least 37.3 V, with an error of 2.6% between the actual and theoretical air breakdown voltages. When the electrode gap is 11 μm, the electrostatic voltage is at least 42.3 V, with an error of 10.5% between the actual and theoretical air breakdown voltages. Both cases meet the design requirements.     

电晕放电辐射场若干特性分析

为了研究电晕放电辐射场若干特性,首先进行了电晕放电时电晕电流的理论分析,研究了电晕电流的波形随电压变化情况。然后在采用针-板电极物理实验模型的基础上进行了电晕放电实验研究,分析了放电针上的充电电压对脉冲电流的影响,并确定了辐射场随传播距离的变化规律以及放电重复率随电压的变化情况。实验结果发现,当针为负极性时先发生放电,但正极性下先发生火花放电;电晕放电辐射场与距离成反比关系;放电重复率随着电压的增大而增大。     

电晕放电辐射信号分析的小波基函数选取

研究电晕放电辐射信号既有利于消除其危害又有助于加强对其利用。针对小波变换提出在不同情况下对不同类型的电晕放电进行分析时,选取小波基函数的方法,理论上可以通过信号与小波波形的匹配或者通过计算信号与小波相关系数的方法来确定,而在不确定放电类型时可进行实际分析。     

对空气静电放电的频域研究

利用辐射电磁场的推迟势方程对空气静电放电的电磁场频谱进行了理论推导,对放电电流峰值和金属小环上的耦合电压峰-峰值进行了测量,使用数字存储示波器记录了放电电流和耦合电压的波形。利用测量结果对静电放电的电磁场频谱进行了理论计算,比较了不同放电电压下耦合电压的幅度谱和功率谱,结果表明:空气静电放电的能量主要集中在直流到2.0 GHz的频段内。     

半无限大海水空间中水平电流元产生的电磁场计算

提出一种根据经典的Summerfield赫兹矢量来计算空气和海水中水平直流电流元在半无限大海水空间中所产生的电磁场的简单方法,并用J．R．Wait, P．R．Bannister和R．L．Dube的方法验证了用该方法推导出的电磁场表达式是正确的。